EFEST 30A 18650 1600 mAh Battery


EFEST 30A 18650 1600 mAh Battery

The EFEST 30A 18650 1600 mAh Battery is a premium high drain battery for your mods. If you are looking for high voltage output, with minimal discharge, the EFEST 30A 18650 1600 mAh Battery is a great battery!

Out of stock

Out of stock


EFEST 30A 18650 1600 mAh Battery

Battery Sizeweight:50gLength:64.91 mmDiamter:18.34 mm
Infotop:flat topBottom:non-procted  
CapacityTypical Capacity:1600mAhMin capacity:1600mAh
Max discharge current30A (20C)quick charge current1600mA (1C)

Quick discharge current

1600mA (10C)cycle life:500 times
Charge cut-off voltage4.2V ± 0.5V
Charge cut-off current0.01C 5A(at CV mode)
Initial ImpedanceMax: 18mΩdischarge cut-off voltage3.0V
Temperature:dishcarge temperature range:-10°C—60°C
shcarge temperature range: 0°C—40°C
storage: 1 year:-20°C—25°C
3 months:-20°C—45°C

Efest IMR 18650 LiMn 1600mAh Battery – Flat Top – 3.7V Rechargeable 
Sold Individually
Dimensions: 66mm (L) x 18mm (D)
30 Amps discharge current, great for mech mods and sub-ohm builds

Safe chemistry LiMN means reduced risk of venting with flame or explosion. Due to the safety inherent in IMR safe chemistry batteries there is no protection circuitry added or built in. This provides a slightly shorter battery length to enable a good fit in most mods. 

To ensure longevity of the EFEST 30A 18650 1600 mAh Battery, it is not recommended to allow the battery to discharge below 2.5V. 

Please note that due to their inherent safety, IMR cells don’t have a protection circuit built in. They should never be discharged below 2.5 volts or cycle life/performance will be reduced. Maximum charge voltage is 4.25 volts on the EFEST 30A 18650 1600 mAh Battery. 


There are no reviews yet.

Be the first to review “EFEST 30A 18650 1600 mAh Battery”

Your email address will not be published. Required fields are marked *